Smart Cards, Program Logic Controllers, Data Radio Frequency Modems, Industrial Controllers, AMR Solutions, AutoPay, Kolkata, India, calcutta

I/O expansion board for CUBLOC core module

CUBLOC Base Board is a I/O expansion board for industrial field applications. The CUBLOC core modules use 5V (TTL) level signals. To use relays or 24V sensors, you can use this base board to input 24V and output through NPN TR.

Analog to Digital input can receive 0 to 10V signals.

PWM output can be routed through NPN TR to convert to 24V signal up to about 10kHz

CUBASE-32M

Input/Output circuit for CuBLOC CB280 module.
24V Input (Photocoupler) : 16
NPN Transistor Output : 12
AD Input, High Counter Input Circuit : 6
PWM output : 6

CUBASE-64M

Input/Output circuit for CuBLOC CB290 module.
24V Input (Photocoupler) : 32
NPN Transistor Output : 32
AD Input Circuit : 8
PWM output : 6
High Counter : 2
DC / DC Converter

CUBLOC Study Board-1

CUBLOC Test Board (for study & testing)
Jumper Wires Included
LEDs, ADCs, switches, pushbuttons, piezo, breadboard, and other

Relay4 Board

Do you need to control high voltage AC or DC?
Add to your CuBASE or CuTOUCH for AC/DC control.
Use with CuBASE or CuTOUCH
MATSUSHITA PA Relay
DIN-RAIL Attachable
ZNR for noise-filtering
Dimensions: (W,H,D) 3.5" x 1.65" x 0.98" (89 x 42 x 25mm)

Relay8 Board

Do you need to control high voltage AC or DC?
Plug-N-Play Relay8 Board. Add to your CuBASE or CuTOUCH for AC/DC control.

Use with CuBASE or CuTOUCH Add-On Board(Plug-N-Play w/ RCABLES)
MATSUSHITA PA Relay
DIN-RAIL Attachable
ZNR for noise-filtering

CASE Relay4 Board

Do you need to control high voltage AC or DC devices from an industrial controller?
Use with CuBASE or CuTOUCH
MATSUSHITA PA Relay
DIN-RAIL Attachable
ZNR for noise-filtering
Maximum AC/DC for Relays: 1A, AC250V 5A / DC30V 5A
Dimensions:(WxHxD) 1.52" x 3.03" x 1.22" (38.7 x 77 x 31mm)

SSR4 Board

Do you need to control high voltage AC? Quietly?

Add to your CuBASE or CuTOUCH for AC control.

CUBLOC SSR without case
Din rail attachable
Input volt: 4~32VDC
Load volt: AC50`240V
Load Current : 0~2A
Dimension: (W,H,D) 3.5" x 1.65" x 0.98" (89 x 42 x 25mm)

SSR8 Board

Do you need to control high voltage AC devices from a digital controller?

Plug-N-Play Relay8 Board. Add to your CuBASE or CuTOUCH for AC/DC control.
CUBLOC SSR without case
Din rail attachable
Input volt: 4~32VDC
Load volt: AC50~240V
Load Current : 0~2A

RCABLE for 32M

OUT PUT : 2
INPINPUT & PWM : 2
AD INPUT : 1
High Count : 1
DC24V Output : 1

RCABLE for 64M

OUTPUT : 4
INPUT & AD INPUT : 5
PWM : 1
High Count & Interrupt : 2
DC24V Output : 1