| |
RF Modems- XBee™ -PRO
|
 | |
|
|
The XBee-PRO OEM RF Module is a ZigBee/IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wireless sensor networks. The modules are easy-to-use, require minimal power and provide reliable delivery of critical data between devices. Due to the innovations stamped in its design, the XBee-PRO yields 2-3x the range of standard ZigBee
modules
The XBee-PRO Module operates within the ISM 2.4 GHz frequency band and is pin-for-pin compatible with MaxStream's XBee (1 mW) Module. The modules are optimized for use in US, Canada, Australia, Israel and Europe.
No configuration is necessary for out-of-box RF communications. The module's default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple AT commands.
Product summary:
- ISM 2.4 GHz operating frequency
- 60 mW (18 dBm), 100 mW EIRP power output (up to 1 mile range)
- U.FL. RF Connector, Chip or Whip antenna options
- Industrial (-40 - 85o C) temperature rating
- Approved for use in the United States, Canada and Europe, ( Click here for a complete list of agency certifications secured by MaxStream)
- Advanced networking & low-power modes supported
All MaxStream radio modems are manufactured under ISO 9001:2000 registered standards and backed by MaxStream's one-year warranty.
| |
![]() |
| Specifications |
| Performance |
| Power Output: |
60 mW (18 dBm), 100 mW EIRP
* |
| Indoor/Urban Range: |
up to
300' (100m) |
| Outdoor/RF Line-of-sight Range: |
up to 1 mile (1.6km) |
| RF Data Rate: |
250 Kbps
|
| Interface Data Rate: |
up to 115.2 Kbps
|
| Receiver Sensitivity: |
-100 dBm
|
|
Networking
|
| Spread Spectrum Type: |
DSSS (Direct Sequence Spread Spectrum) |
| Network
Topology: |
Peer-to-peer, point-to-point
& point-to-multipoint |
| Error Handling: |
Retries & acknowledgements |
| Filtration Options: |
PAN ID, channels and addressing |
| Channel Capacity: |
13 Direct Sequence Channels (software selectable) |
| Addressing: |
65,000 network addresses available for each channel |
| Encryption: |
128-bit AES (coming soon) |
|
Power
|
| Supply Voltage: |
2.8 - 3.4 V |
| Transmit Current: |
270
mA
(@ 3.3 V) |
| Receive Current: |
50
mA (@ 3.3 V) |
| Power-down Sleep Current: |
<10 µA |
|
General
|
| Frequency Band: |
2.4000 - 2.4835 GHz |
| Serial Data Interface: |
3V CMOS UART - No configuration required |
|
Physical Properties
|
| Size: |
0.960" x
1.297" (2.438 cm x 3.294 cm) |
| Weight: |
0.14 oz. (4g)
- w/ U.FL. connector |
| Antenna Options: |
U.FL. RF connector, chip antenna, or whip antenna |
| Operating Temperature: |
-40 to 85o C (industrial) |
|
Certifications
|
| United States
FCC: |
OUR-XBEEPRO |
| Canada (IC): |
4214A-XBEEPRO |
| Europe (CE): |
ETSI |
| Class 1 Division 2: |
Approved |
|
| |
| |
Additional Information
|
|
|
|
Downloads
|
Datasheet
(471Kb.pdf)
Product
Manual (787Kb.pdf) |
|
 |
|
24X Stream | Xbee | Advantages | Application Areas
|
|
|
|
About Us | Solutions | Program Logic Controllers | AMR
Products | RF Modems | Customers
| |
|
|
